Formula · 7.9

Brand · 7.9

CeraVe · face and body lotion · US

CeraVe Daily Moisturizing Lotion

CeraVe Daily Moisturizing Lotion
7.9

LabReadAI label score

How the score is calculated
  • Actives and evidence0.9Actives with strong evidence: 1 of 2
  • Active concentration0.7Actives sit above the 1 % line — by list order a working concentration is 70 % likely
  • Completeness for the purpose0.6For “dryness and a damaged barrier” — 58 %; without petrolatum or mineral oil, which seal moisture; a formula with one main purpose
  • Tolerance1.0No ingredients from irritant or allergen lists
  • adults
  • pregnancyallowed per the leaflet
  • sensitive skin
  • atopic skin
  • dry skin
  • children
  • oily skin
  • acne-pronemay clog pores in leave-on face products
Free from:
  • alcohol (alcohol denat) · by the listthe list has no ingredient of the “denatured alcohol” group — evaporates fast and degreases; frequent contact can dry the skin — a tolerance question, not a regulatory one; does not clog pores
  • sulfates (SLS/SLES) · by the listthe list has no ingredient of the “ammonium laureth sulfate (ALES), ammonium lauryl sulfate (ALS), sodium coco-sulfate, sodium laureth sulfate (SLES), sodium lauryl sulfate (SLS), sodium myreth sulfate, TEA-lauryl sulfate” group — a cleansing surfactant from the sulfate family but with an ethoxylated chain: it cleanses more gently than lauryl sulfate. Still not for those looking for a sulfate-free product.
  • formaldehyde releasers · by the listthe list has no ingredient of the “formaldehyde releasers” group — preservatives that slowly release formaldehyde; allowed at low levels but a frequent cause of contact allergy
  • isothiazolinones (MIT/MCI) · by the listthe list has no ingredient of the “isothiazolinone preservatives (MIT/MCI)” group — preservatives; banned in EU leave-on products and limited in rinse-off (0.0015%) — a frequent cause of contact allergy
  • fragrance · by the listthe list has no ingredient of the “fragrance and its allergens” group — the fragrance and its aromatic components; the EU requires 26 of them to be listed separately — matters to people allergic to fragrance, does not affect how the product works
  • parabens · by the listthe list has no ingredient of the “parabens” group — preservatives; methyl- and ethylparaben are recognised as safe at permitted levels, propyl- and butyl- are limited by the EU to 0.14 %; a frequent buyer question rather than proven harm
  • mineral oils and petrolatum · by the listthe list has no ingredient of the “petrolatum and mineral oils” group — purified cosmetic-grade petroleum products: form a protective barrier film; safety is established, a preference question; 0–2 of 5 (depends on the raw-material source), cosmetic white oil per DiNardo (2005) is non-comedogenic
  • soap · by the listthe list has no ingredient of the “potassium soap (potassium cocoate), plant soap base (sodium palmate, sodium cocoate), tallow soap base (sodium tallowate)” group — liquid soap: fatty acids boiled with alkali. It cleanses well, but its acidity is around 9-10 against 5 for skin, which is why it often leaves tightness. The product is rinsed off, so the question is tolerance.
  • gelatin in the coating · by the listthe list has no ingredient of the “vegetarian coating” group — a plant-based tablet coating instead of gelatin; it keeps moisture out and makes swallowing easier
  • toning dyes · by the listthe list has no ingredient of the “violet toning dyes” group — direct dyes that settle on the hair surface and cancel the yellow cast of blonde; they wash out in 1–3 washes and leave a lilac tint if left too long; HC Blue 2 and Disperse Violet 1 are known contact allergens of hair dyes
  • tar · by the listthe list has no ingredient of the “wood (birch) tar” group — a traditional remedy for dandruff and itching with a sharp smell; it reduces flaking, but can irritate a sensitive scalp and dries the hair
What for: Dry skin needs three things at once: draw water in (glycerin, hyaluronate), rebuild the barrier (ceramides with cholesterol, panthenol) and seal moisture with a film (petrolatum, oils). One of the three is half the job.
When:
  • leave-on
  • morning
  • evening
on skin — morning and evening after cleansing; in shampoo and conditioner — at every wash
When to expect an effect: barrier, dryness — 2–4 weeks; hydration — immediately; lasting effect — 2–4 weeks

Ingredients — 22 components · 2 work

What works: 2 of 22 ingredients: ceramides, hyaluronic acid. Dry skin needs three things at once: draw water in (glycerin, hyaluronate), rebuild the barrier (ceramides with cholesterol, panthenol) and seal moisture with a film (petrolatum, oils). One of the three is half the job.

Strengths: actives and evidence, tolerance

What lowers the score: active concentration: actives sit above the 1 % line — by list order a working concentration is 70 % likely; completeness for the purpose: for “dryness and a damaged barrier” — 58 %

Questions: no debatable ingredients in the formula

  • Ceramides + Hyaluronic acid — reinforce each otherhyaluronate draws moisture in, ceramides keep it
  • Ceramides + skin-identical components — reinforce each otherceramides with cholesterol and fatty acids restore the barrier better than alone
  • Aqua/Water/Eau base: coating, fillers · water — the solvent and base; listed first because there is more of it than anything else; in supplements — part of the capsule shell
  • Glycerin base: coating, fillers · a humectant: coats the tablet, holds moisture in creams and shampoos; does not clog pores
  • Caprylic/Capric Triglyceride base: coating, fillers · a coconut-oil fraction, a light emollient and carrier of actives; does not clog pores
  • Cetearyl Alcohol base: coating, fillers · a fatty-alcohol blend (C16–C18), an emulsifier and thickener, does not dry the skin; paired with ceteareth-20 — 4 of 5; rarely clogs pores in leave-on face products
  • Cetyl Alcohol base: coating, fillers · a fatty alcohol, emulsifier and thickener; does not dry the skin — not “alcohol” in the everyday sense; rarely clogs pores
  • Dimethicone base: coating, fillers · form a smooth film and shine; inert and not absorbed — a preference question, not a safety one
  • Phenoxyethanol base: coating, fillers · the most widespread cosmetic preservative: it keeps the product sterile. Permitted in the EU up to 1 %, recognised as safe at that level.
  • Polysorbate 20 base: coating, fillers · cleanse and bind water with oils; milder than the sulfate ones
  • Ceteareth-20 base: coating, fillers · an ethoxylated cream emulsifier; paired with cetearyl alcohol — 4 of 5; rarely clogs pores in leave-on face products
  • Behentrimonium Methosulfate base: coating, fillers · soften, condition and carry the actives; the backbone of the texture
  • Polyglyceryl-3 Diisostearate base: coating, fillers · a water-in-oil emulsifier; may clog pores in leave-on face products; a finished product with it is not always comedogenic
  • Sodium Lauroyl Lactylate base: coating, fillers · a mild surfactant and emulsifier from lactic acid and a fatty acid: it binds water with oils and cleanses lightly.
  • Ethylhexylglycerin base: coating, fillers · a preservative booster and skin-conditioning ingredient: it barely preserves on its own but helps phenoxyethanol work and lowers the amount needed.
  • Potassium Phosphate base: coating, fillers · tune the acidity and texture; salt is a common shampoo thickener
  • Disodium EDTA base: coating, fillers · bind hard-water metals so the formula stays stable and the foam works
  • Dipotassium Phosphate base: coating, fillers · tune the acidity and texture; salt is a common shampoo thickener
  • Ceramide NP works · the active ingredient — what the product is for; form: ceramides NP, AP, EOP
  • Ceramide AP works · the active ingredient — what the product is for; form: ceramides NP, AP, EOP
  • Ceramide EOP works · the active ingredient — what the product is for; form: ceramides NP, AP, EOP
  • Phytosphingosine base: coating, fillers · amino acids, lipids and sugars akin to the skin’s own components — support for its barrier
  • Cholesterol base: coating, fillers · amino acids, lipids and sugars akin to the skin’s own components — support for its barrier
  • Xanthan Gum base: coating, fillers · hold the texture: gels, creams and foam do not separate
  • Carbomer base: coating, fillers · hold the texture: gels, creams and foam do not separate
  • Sodium Hyaluronate works · the active ingredient — what the product is for; form: sodium hyaluronate
  • Tocopherol base: coating, fillers · vitamin E at hundredths of a percent: keeps the oils of the formula (a cream or a capsule fill) from going rancid; at that share it protects the product, it is not vitamin E as an active

CeraVe Daily Moisturizing Lotion is a product whose active ingredient is ceramides + hyaluronic acid. The concentration is not declared; the active sits after the 1 % line, but works at small shares. The effect is supported by studies: ceramides. The effect is moderately supported: hyaluronic acid. The formula has 22 ingredients, 2 of which do the work; the rest is the formula base. Well-matched pairs in the formula: ceramides + hyaluronic acid; ceramides + skin-identical components. Dry skin needs three things at once: draw water in (glycerin, hyaluronate), rebuild the barrier (ceramides with cholesterol, panthenol) and seal moisture with a film (petrolatum, oils). One of the three is half the job. By the list, no alcohol (alcohol denat), sulfates (SLS/SLES), formaldehyde releasers, isothiazolinones (MIT/MCI), fragrance, parabens, mineral oils and petrolatum, soap, gelatin in the coating, toning dyes, tar. Suitable for: adults, pregnancy, sensitive skin, atopic skin, dry skin, children, oily skin. acne-prone — ask a doctor. Use: on skin — morning and evening after cleansing; in shampoo and conditioner — at every wash. When to expect an effect: barrier, dryness — 2–4 weeks. Label score — 7.9 out of 10 (actives with strong evidence: 1 of 2; actives sit above the 1 % line — by list order a working concentration is 70 % likely; for “dryness and a damaged barrier” — 58 %; without petrolatum or mineral oil, which seal moisture; a formula with one main purpose).

Who it does not suit

When to stop: tightness in dry air — apply under a cream

Is this product right for your skin?

The score describes the formula, not your skin: the same product dries one person and saves another. Describe your skin type, reactions and goals, attach a photo of the ingredient list or the product — we will go through every ingredient and say whether it suits you, what to pair it with and what to avoid.

Cosmetic ingredient checkDecode my tests

Similar products

Same nutrient and the same purpose — closest by form and dose. Each has its own score by the same method, so you can see whether there is an option nearby that is more honest or simpler in composition.